OVERVIEW
The coolest half stack you've laid eyes on.
With Wiggy amp head and speaker cabinet in a half stack package.

Switching on the Wiggy activates the hazard flashers (power indicator), and you plug in to HIGH OCTANE (high gain) or LOW OCTANE (low gain) jacks located just below the MORE (drive/boost) knob. Twist the RPM (gain) and MPH (master volume) controls to get things going, then sculpt your basic tone with the BATT, OIL, and TEMP (low, mid, and high) EQ knobs. There's also a BOOST control for post EQ fuzz. When you're ready to push things into the red zone, go for the WIGGY tone sliders (5-band More/Less tone control), the PRESENCE, T. DYNAMICS, and RESONANCE controls. Amplifier section outputs 100W into 4, 8, or 16 ohms (switchable impedance), footswitchable effects loop with level switch, preamp out and power amp in jacks, dual paralleled speaker output jacks, lighted control panel, footswitch included.

The Wiggy cab features 2 - 12" Sheffield 1230 speakers; switchable stereo or mono operation; 16 ohms mono, 8 ohms stereo; and 150W mono, 75W per side stereo power handling. Closed-back configuration cabinet, but the back is removable. 2 - 1/4" input jacks.
FEATURES
Head:
100W into 4, 8, or 16 ohms, selectable impedance
HIGH and LOW OCTANE input jacks
Footswitchable TransTube MORE front end (gain boost level)
Hazard lights flash when MORE function is engaged
RPM (gain) and MPH (master volume) controls
3-band BATT, OIL, and TEMP (low, mid, and high) EQ BOOST control for post EQ fuzz
5-band WIGGY graphic EQ
PRESENCE and T. DYNAMICS controls
RESONANCE switch
Footswitchable effects loop with level switch
PRE AMP OUT and POWER AMP IN jacks
Dual paralleled SPEAKER OUTPUT jacks
Lighted control panel
Footswitch included
 
Cabinet:
2 - 12" Sheffield 1230 speakers
Switchable stereo or mono operation
16 ohms mono, 8 ohms stereo
150W mono, 75W per side stereo
Closed-back configuration (back is removable)